Something is shining here!

micro-rooms

Bring your model landscapes to life with the producer's high-quality LED lighting. This lighting solution offers outstanding brightness and makes your model buildings look even more realistic, even at night!

Brilliant brightness, versatility and simplicity: The producer's LEDs produce a brilliant light that makes every aspect of your model buildings shine. Whether it's an atmospheric warm light for cosy houses or a cool, bright light for busy urban scenes, the producer's LEDs adapt flexibly to your needs. The simple installation makes it possible to light up your model buildings quickly and easily.

The LED boards are 0.7 x 1.8 cm in size and are therefore also suitable for house lighting systems and light boxes from other manufacturers such as Viessmann®. 

Product Highlight:

• double LEDs
• warm white LEDs
• particularly good value
• flicker-free & long-lasting
• can be connected to a 16 V model railway transformer with a series resistor (300 Ohms)
• suitable for AC and DC
• fit other manufacturers’ lighting systems, e.g. Viessmann®

For using the NOCH Mirco-Rooms LEDs with a model railway transformer (output max. 16 V AC, e.g., Märklin 6647, 66471, 6631, 37540, etc.; Fleischmann 6755, 6735, etc., and other manufacturers), each LED board connected to the transformer must be used with a series resistor (300 Ohms). The resistor must be installed (e.g., soldered) between one of the board’s connection wires and the transformer. The direction of the resistor and the choice of wire are arbitrary.
WARNING: If the resistor is not used, the board may burn out. There is a risk of injury and fire!

IMPORTANT NOTICE:
Unfortunately, there was an error in the first production batch (batch number 27124012). The required resistors are not included with this batch, but you can request them from the producer.