Something is shining here!

micro-rooms

The NOCH micro-rooms system is based on cardboard light rooms of different sizes that can be decorated with the enclosed decorative sheets. Provided with a floor, wallpaper, etc., they are ideal to be decorated with NOCH furniture and figures.

The LEDs are affixed at the top of the light room. Assisted by the enclosed diffuser film, light from the LED is realistically distributed throughout the room. If you want, hang up a pair of curtains and you’ll have another highlight in your model world!

Design lovely details with NOCH products, from everyday scenes at the kitchen table to a passionate night of lovemaking in the bedroom!

The LED circuit boards measure 0.7 cm x 1.8 cm and are thus suitable for home lighting systems and light boxes by other manufacturers such as Viessmann®
 

Product Highlight:

• singe LEDs
• warm white LEDs
• particularly good value
• flicker-free & long-lasting
• can be connected to a 16 V model railway transformer with a series resistor (300 Ohms)
• suitable for AC and DC
• fit other manufacturers’ lighting systems, e.g. Viessmann®

For using the NOCH Mirco-Rooms LEDs with a model railway transformer (output max. 16 V AC, e.g., Märklin 6647, 66471, 6631, 37540, etc.; Fleischmann 6755, 6735, etc., and other manufacturers), each LED board connected to the transformer must be used with a series resistor (300 Ohms). The resistor must be installed (e.g., soldered) between one of the board’s connection wires and the transformer. The direction of the resistor and the choice of wire are arbitrary.
WARNING: If the resistor is not used, the board may burn out. There is a risk of injury and fire!

IMPORTANT NOTICE:
Unfortunately, there was an error in the first production batch (batch number 27124012). The required resistors are not included with this batch, but you can request them from the producer.